2024 Honda CRF250R

2024 Honda CRF250R
Red
MSRP: $8,299.00
Manufacturer: Honda
Condition: New

Description

EAST OR WEST, IT’S THE BEST

 

There’s never been any doubt about the best bike in the 250 class, but if you need more proof, just check out the results from this year’s Supercross. Jett and Hunter Lawrence can ride anything they want, but they both choose the Honda CRF250R, and rode away with both the 250 East and 250 West AMA Supercross championships—and with a huge points margin to boot! And it’s easy to see why: CRF250R stacks the deck when it comes to torque and midrange power—where you really need it for critical track sections like whoops, managing jumps, or blasting out of deep loam and berms. Plus, we’ve gone to extra lengths to keep the bike light, narrow, and responsive. For 2024, the choice is clear: You need to be on a Honda CRF250R . . . unless you’re happy racing for second place.

If you’re serious about getting on the podium, you know your best chance is when you Ride Red. And this year, we’re giving you even more incentive through our Honda Red Rider Rewards Program. You win twice—once on the track, and again at the bank! Check out our Red Rider Rewards Program to learn more.

 

Specifications

Engine

Engine Type
249cc liquid-cooled single-cylinder four-stroke
Bore And Stroke
79.0mm x 50.9mm
Compression Ratio
13.9:1
Valve Train
DOHC, four valves per cylinder
Induction
Programmed Fuel-Injection system (PGM-FI); 44mm throttle bore
 

Drive Train

Transmission
Five-speed
Final Drive
#520 Chain; 13T/50T
 

Chassis Suspension Brakes

Front Suspension
49mm leading-axle inverted Showa® SPG coil-spring fork with rebound- and compression-damping adjustability; 12.2-inch travel
Rear Suspension
Pro-Link Showa single shock with spring preload, rebound- and compression-damping adjustability; 12.3-inch travel
Front Brakes
Single 260mm disc
Rear Brakes
Single 240mm disc
Front Tires
Pirelli Scorpion MX32 80/100-21
Rear Tires
Pirelli Scorpion MX32 100/90-19
 

Dimensions

Rake
27.3°
Trail
4.6 inches
Wheelbase
58.1 inches
Seat Height
37.8 inches
Curb Weight
229 pounds (Includes all standard equipment, required fluids and full tank of fuel)
Fuel Capacity
1.7 gallons
Ground Clearance
13.1 inches
 

Other

Available Colors
Red
Model ID
CRF250R
 

Features

Engineering

  • NINE-PLATE CLUTCH ASSEMBLY Say good-bye to clutch fade—the bike uses a nine-plate design to improve durability and hookup. That means less slip at peak horsepower, better torque transmission through the clutch pack and greater durability. Plus, the clutch pull is lighter, and you get improved engagement feel.
  • DOHC ENGINE LAYOUT The CRF250R uses a double-overhead-cam (DOHC) engine layout with a unique finger-follower rocker design. Together with the rest of the engine’s architecture (bore and stroke, intake tract, piston, and more), you get more power and a higher redline.
  • SINGLE-PIPE EXHAUST The CRF250R uses a single-pipe header. It routes close to the center of the bike, and its light overall construction helps improve weight distribution. The single muffler uses a pressed-alloy design that lets us shape the muffler body for better rider ergonomics and lighter weight.
  • ENGINE MODE SELECT BUTTON This simple handlebar-mounted button lets you dial in engine power delivery character with a push of your thumb. Choose between Standard, Smooth and Aggressive, depending on track conditions or rider preference.
  • SPECIAL PRIMARY AND TRANSMISSION RATIOS To handle more broad midrange power and torque, the CRF250R gets special primary and transmission ratios. The ratios let our engineers use the same shaft centerlines as the previous design, so the transmission itself remains light and compact.
  • GEAR-POSITION ENGINE MAPPING Talk about smart: The CRF250R features an ECU with special engine mapping for each gear. You can’t give an inch in this class, so having your engine deliver optimal power for each gear choice is one of the features that separates CRF250R riders from the rest.
  • LITHIUM-ION BATTERY Like the rest of the CRF250R, the bike’s Lithium-Ion battery is both super light and high performing. In fact, it weighs less than half the weight of a conventional lead-acid battery.
  • TITANIUM FUEL TANK Every gram counts on a bike in the 250 class, which is why the 2024 CRF250R has a titanium fuel tank. Light and strong, it’s also thinner than our previous plastic unit, freeing up more space and helping to centralize fuel mass.
  • TOTAL AIR MANAGEMENT Total air management means complete attention to how efficiently air gets through the intake, through the head, and out the exhaust. Eliminate losses here, and you make more power everywhere. And the best part: It’s free horsepower—you just need a bike with smart design.
  • BIG BORE/SHORT STROKE The CRF250R’s 79.0mm bore and short 50.9mm stroke let our engineers create a high-revving engine with plenty of room for large valves. The engine breathes and revs—the two keys to making power in the motocross world.
  • DOWNDRAFT INTAKE AND EXHAUST LAYOUT The DOHC cylinder-head design lets our engineers straighten out the CRF250R’s intake and exhaust tracts. The intake is short and just about arrow straight, and the exhaust flows more efficiently too. The straighter ports also help boost low-speed and midrange torque as well as throttle response.
  • WIDE WATER-PUMP DRIVE GEARS Making the water-pump drive gear wide gives it more tooth-engagement area for longer component life.
  • ENGINE OIL SCAVENGE PUMP Deep in the engine, there’s a special oil scavenge pump that we’ve designed to be especially small and out of the way. While you may never see it, it helps keep the CRF250R’s overall design compact.
  • TWO-LEAD SHIFT DRUM By changing from three to two lead tracks on the shift drum, we improved the shift feel between second and third gears.
  • "H" SECTION CRANK Look closely at the CRF250R’s crankshaft profile and you’ll see its “H” cross-section design. Just like a structural “I” beam in an aircraft wing or a skyscraper, it boosts strength and cuts weight over a conventional crank’s shape—a big deal when you consider this part spins at over 14,000 rpm!
  • SHARED ENGINE/GEARBOX LUBRICATION The 2024 CRF250R uses a shared engine/transmission oiling design. Combining the two systems shaves weight and helps make the engine more compact, especially when it comes to placing the right-side cam drive and the clutch so close together.
  • TITANIUM INTAKE AND EXHAUST VALVES Light is right when it comes to a high-revving engine’s reciprocating masses. That’s why the CRF250R uses titanium intake and exhaust valves. Plus, the valve angle is a super-narrow 20.5 degrees (included). Ovalized valve springs, doubled intake springs and long-wearing Diamond-Like Carbon (DLC) treated finger rockers complete the package.
  • LOWER SEAT/NARROWER BODY Fine tuning the seat height and narrowing the bodywork makes it easier for you to move around on the bike and help enhance rider comfort.

Technology

  • HRC LAUNCH CONTROL We’re talking about a special ECU program here: push the button to select the mode, hold the throttle open, release the clutch, and the CRF250R will do the rest, launching you into the first turn with a big advantage. It turns your bike into a holeshot-seeking machine!
  • ELECTRIC START The CRF250R is equipped with an effortless electric starter. Convenient and lightweight, it’s a huge deal if you need to restart a stalled bike in the heat of battle.

Performance

  • FUEL INJECTION By installing the CRF250R’s fuel injector at a 60-degree angle, the injector sprays fuel all the way back to the throttle butterfly. The engine gets a cooler, denser fuel charge for more power and better torque. It’s little details like this that put the CRF250R up front.
  • HIGH REDLINE With our better-breathing DOHC design and the big-bore/short-stroke engine, the CRF250R’s rev limit is way impressive. The same goes for peak power and peak torque.
  • HIGH-PERFORMANCE CAM PROFILES With input directly from our HRC factory team, we’ve given the CRF250R cam profiles that help the engine produce better bottom end torque and power, while still retaining the CRF250R’s screaming peak.
  • MORE POWER Feel free to hold that throttle open and head for the first turn—the CRF250R is designed to win that critical holeshot drag race. You’ll also feel the increased low-end to mid-range torque.
  • BRIDGED-BOX PISTON The CRF250R’s bridged-box piston is the final piece to the bike's engine performance package. The design features a reinforcing structure between the skirts and the wrist-pin bosses that helps enable the CRF250R’s high redline.
  • HIGHER-CAPACITY RADIATOR When you’re making big power and riding long motos, you need plenty of radiator capacity to keep your engine running strong. No worries—the 2024 CRF250R features six percent more radiator area than the earlier generation’s design.
  • HIGH-VOLUME AIRBOX AND AIR CLEANER The CRF250R features an air-cleaner element with plenty of surface area and volume. Plus, the airbox itself has a whopping 78 percent more capacity than the previous generation's design. More air equals more power, especially in the midrange. In addition, we’ve made it easier to service the air filter too.
  • THROTTLE BODY With a 44mm venturi designed to speed up airflow, the CRF250R’s throttle body really reaps benefits at low engine operating speeds. You get power and snap, right now.

Handling

  • SUPERIOR FRAME RIGIDITY Great handling starts with a superior frame, and that’s one place where the CRF250R’s chassis puts you out front. First, it’s light. By making the frame’s main spars narrow, we save weight, but more importantly we made the chassis more responsive by fine-tuning the lateral rigidity. The result is a bike that gets into, around, and out of corners faster.
  • REAR SUSPENSION Our Pro-Link design lets us give the 2024 CRF250R 12.3 inches of suspension travel, along with a lightweight spring. All resulting in a plush, controlled ride.
  • 260mm FRONT BRAKE The CRF250R’s large front-brake disc measures a whopping 260mm. You get great brake feel and a pattern that cuts down on weight. Front and rear brake-disc guards are part of the package too.
  • LOW REAR SHOCK MOUNT With its low rear shock mount on the frame, the CRF250R benefits from both a lower center of gravity (cg) as well as chassis stability.
  • SHORT SWINGARM The CRF250R’s short swingarm helps make it light, and also helps give the bike better rear-wheel traction, and reduces unsprung mass, important considering how much power you have on tap.
  • SHOWA® SPRING FORK The 49mm Showa® fork features a conventional spring design that helps increase the CRF250R’s front-suspension precision, handling and feel. The fork’s 39mm piston diameter and 25mm rod diameter are designed to provide a plush feel and supple action.
  • SINGLE EXHAUST ROUTING The CRF250R’s single-pipe exhaust lets you move more freely on the bike. By tucking it in unobtrusively, it makes moving around on the bike easier than ever.
  • LOWER BATTERY MOUNTING To keep a bike’s center of gravity low, you need to pay attention to all the details. That’s why we locate the CRF250R’s battery low in the chassis. It’s just another reason why the bike handles so well.
  • PIRELLI SCORPION MX32 TIRES The 2024 CRF250R comes equipped with Pirelli Scorpion MX32 tires front and rear. The tread patterns and compounds are designed to offer good grip and feedback in a wide range of conditions and track surfaces.
  • REAR SUBFRAME The CRF250R’s subframe uses extruded rear members that produce a 20-percent reduction in weight versus the previous generation. Since that weight comes off the top of the bike, it also contributes to the CRF250R’s low center of gravity.

Styling

  • DETAILED BODYWORK MOUNTING It may seem like a small thing, but every second counts when you’re servicing your bike between motos. Fewer bolts mean enhanced serviceability, at the track or in your garage.
  • SMOOTH STYLING Blending the CRF250R’s body panels does more than just make the bike look smooth, fast, and stylish. It also helps you move around on the bike while riding. Nothing wrong with smooth, fast, and stylish, though.
  • "IN MOLD" GRAPHICS With all the time you’ll be spending in victory circle, you need to look your best. The CRF250R has you covered. Our “in mold” graphics look great, and stay looking good.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








NOTES ON AVAILABILITY OF CYCLEPARTSNATION PARTS:
  • Being able to add motorsports parts and accessories to your shopping cart is not an indication of the parts being in stock at cyclepartsnation. We sell millions of powersports parts at wholesale prices and can't possibly keep them all in stock. What we don't stock is ordered direct from our motorsports manufacturers and shipped to you.
  • Although we regularly receive updates about unavailable parts with older vehicles from our motorsports manufacturers, occasionally, motorsports parts may be able to be added to your shopping cart that are discontinued and no longer in production. We will notify you if this is the case.

Copyright gohondapart.com All rights reserved. No part of this website can be reproduced without written consent of the owner.